Gasketed Plate Heat Exchangers
Design pressure to 2.5 MPa (25 bar); design temperature -25 °C to +180 °C; heat transfer area 0.1 to 2,500 m² per unit; fully serviceable and re-gasketed in the field.
Quote thisSeven Heat Exchanger Types, Custom-Engineered to Duty and Code
Shanghai Jiangxing manufactures industrial heat exchangers to ASME, PED, and GB for OEMs, engineering companies, and process equipment suppliers in the US and EU.
15+ (est. 2010)
Years in business
Manufacturer
Supplier type
US, EU, and worldwide
Export markets
ASME, PED, CE, GB
Certifications
ASMEPED/CEGB (Chinese national pressure vessel standard)
Supplier-declared, pending confirmation
Heat Exchanger Types and Capabilities
Brazed Plate Heat Exchangers
Copper-brazed to 4.5 MPa (45 bar) and -196 °C to +225 °C; nickel-brazed to +400 °C; CO₂/R744 variants rated to 14 MPa for transcritical refrigeration circuits.
Quote this
Fully Welded Plate Heat Exchangers
Gasket-free laser- or TIG-welded plate cassettes; design pressure to 40 bar typical; design temperature to approximately 350 °C; suited to aggressive media where gasketed units cannot be used.
Quote this
Welded Plate-and-Block Heat Exchangers
Welded construction with removable side panels for inspection and mechanical cleaning; designed for high-fouling duties, chemical processing, and heat recovery where periodic access is required.
Quote this
Shell and Tube Heat Exchangers
Pressure-vessel construction for high-pressure and broad fluid range; typical duties include oil coolers, steam condensers, and reactor heating; designed to applicable pressure-vessel code.
Quote thisFinned Tube and Food-grade Heat Exchangers
Finned tube units for extended-surface gas-side duties including air coolers, economizers, and flue-gas heat recovery; food-grade hygienic plate units built to sanitary standards for dairy, beverage, and brewery applications.
Quote thisWhy Buyers Specify Jiangxing
Multi-code design capability
Units are engineered and certified to ASME, PED, CE, and GB as required by the destination market, removing the compliance burden from the buyer's engineering team.
Full technology range from one source
Gasketed, brazed, fully welded, plate-and-block, shell-and-tube, finned tube, and hygienic designs are all manufactured in-house, so OEMs and distributors can consolidate thermal equipment sourcing.
Engineered to duty, not catalogue
Each unit is custom-specified to operating pressure, temperature, fluid properties, flow rates, and applicable design code rather than selected from a fixed catalogue.
Extended operating envelope
The product range covers cryogenic duties from -196 °C (brazed, nickel) through to 400 °C, pressures from vacuum to 14 MPa (CO₂ brazed), and heat transfer areas from 0.1 to 2,500 m² per unit.
Spare parts and plate supply
Jiangxing supplies replacement plates, gaskets, and spare parts, including for third-party frames, reducing buyers' long-term maintenance dependency on the OEM.