O-Rings and Seals
All standard sizes in NBR, EPDM, silicone, Viton, and FFKM; high-pressure and FDA-approved grades available.
- Static and dynamic O-rings
- High-pressure seals
- FDA-grade seals
- FFKM seals for aggressive media
Manufacturing Excellence in Rubber Products Since 2021
Industrial Rubber Components Manufactured for OEM Applications
ISO 9001:2015 certified production of O-rings, seals, hoses, and custom molded parts across all major elastomers, built to your specification.
2021
In operation since
Direct manufacturer
Supplier type
ISO 9001:2015
Certifications
NR, NBR, EPDM, Silicone, Viton, FFKM
Elastomers supported
ISO 9001:2015
Supplier-declared, pending confirmation
Product Range
Rubber Sheets and Rolls
1 mm to 50 mm thickness, widths up to 2 m; natural and synthetic rubber grades for flooring, lining, and fabrication use.
- NR general-purpose sheets
- NBR oil-resistant sheets
- EPDM weather-resistant rolls
- Anti-static rubber sheets
Gaskets
Cut and molded gaskets in all major elastomers for fluid sealing, flange sealing, and pressure containment.
- Flange gaskets
- Pipe gaskets
- Custom-cut sheet gaskets
- High-temperature gaskets
Rubber Hoses and Tubes
Reinforced construction; pressure-rated and chemical-resistant options in various diameters for fluid transfer applications.
- Hydraulic hoses
- Chemical-resistant tubing
- Air and water hoses
- Multi-layer reinforced hoses
Anti-Vibration Mounts and Pads
Metal-bonded construction in various load capacities for shock absorption and noise reduction in industrial and OEM equipment.
- Metal-bonded anti-vibration mounts
- Rubber pads and blocks
- Machinery isolation mounts
- Grommets
Custom Molded Rubber Parts
Compression, transfer, and injection molding from prototype through large-batch production across all elastomers.
- Compression-molded profiles
- Injection-molded precision parts
- Extruded rubber profiles
- Prototype and short-run components
Why Source From Us
ISO 9001:2015 certified production
Every product leaves the facility under a documented quality management system, inspection records and material traceability are available on request.
Full elastomer range in-house
NR, NBR, EPDM, silicone, Viton, and FFKM are all processed under one roof, so multi-material OEM programs do not require multiple suppliers.
Three molding processes available
Compression, transfer, and injection molding are each available, allowing the right process to be matched to part geometry, volume, and tolerance requirements.
Prototype to large-batch capability
Development samples and production runs are handled by the same manufacturer, reducing qualification risk when scaling from prototype to series production.
Rigorous in-house quality testing
Physical and dimensional testing is conducted in-house before dispatch, with results available to OEM buyers who require incoming inspection documentation.
Sourcing FAQ
Is Niharika Rubber Industries a manufacturer or a trading company?
Niharika Rubber Industries is a direct manufacturer. Molding, extrusion, and quality testing are all performed at its own facility.
Which elastomers are available for custom parts?
All major elastomers are supported: natural rubber (NR), nitrile (NBR), EPDM, silicone, Viton (FKM), and FFKM. Material selection can be discussed based on the application's temperature, chemical, and pressure requirements.
What certifications does the manufacturer hold?
The facility is ISO 9001:2015 certified (supplier-declared; confirm current certificate status before ordering). FDA-approved grades are available for specific O-ring and seal products where food or pharmaceutical contact is required.
Which HS codes apply to these products?
Products are classified under HS codes 4016.93 (O-rings and other articles), 4009.21 (rubber tubes and pipes), 4008.21 (rubber plates, sheets, and strip), and 4016.99 (other vulcanized rubber articles). Confirm the applicable code with your customs authority for your import market.
Can the company produce custom parts from drawings or samples?
Yes. Custom molded parts are produced via compression, transfer, or injection molding from prototype through large-batch production. Submit a drawing, sample, or specification through the inquiry form and the team will confirm feasibility and provide pricing.
How do I request pricing or samples?
Use the inquiry form on this page. Provide your part drawing, required material, quantity, and target application, and the team will respond with pricing and lead time. Prototype quantities are accepted.